Please check new parameter for Miyano machine ( include N900-N909 ) and follow up the process as below :
S1: Press Reset & Delete at same time and Turn on the power
S2: Select Mode MDI, press EMG, PWE = 1
S3: Go into Parameter , upload from N900-N909
S4: Upload
- N552= 10 ( 4800 baute rate )
- N553 = 10 ( 4800 baute rate )
S5: Connect to PC ( press P-9999 and press Input
S6 : Turn Power off
S7: Turn Power on, PWE=1, go to Diagnostic and upload N300 – N600
S8 : change PWE=0 and turn off Power
S9 : Turn on Power ( Re Start )